LATICRETE® Hydro Ban®

LATICRETE® Hydro Ban®

LATICRETE Hydro Ban is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. LATICRETE Hydro Ban is a single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. LATICRETE Hydro Ban bonds directly to a wide variety of substrates.

  • Allow for flood testing in 2 hours at 70°F (21°C) or higher*
  • Does not require the use of fabric.**
  • Bonds directly to metal and PVC plumbing fixtures only.
  • Thin; only 0.020–0.030″ (0.5–0.8 mm) thick when cured.
  • Changes in color from a light sage to an olive green when cured.
  • Anti-fracture protection of up to 1/8″ (3 mm) over shrinkage and other non-structural cracks.
  • “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
  • Exceeds ANSI A118.10 and A118.12.
  • IAPMO approved.
  • Contains Microban® antimicrobial product protection.
  • Rapid drying for a faster time to tile.
  • Lighter color for ease of inspection.
  • Safe—no solvents and non-flammable.
  • Install tile, brick and stone directly onto membrane.

* Refer to cautions section of datasheet for more information on curing

** For gaps 1/8″ (3 mm) or less see DS 663.5 for complete instructions

About The Author

Related posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Custom 280×280